| PRODUCT MODEL |
E3F-R |
E3F-SR |
| Image/Video/Audio |
| Image sensor: |
5 MegaPixels 1/2.5" Near IR CMOS Image Sensor |
| Sensitivity (LED off): |
0.001 Lux / F1.2 / 30IRE (LED OFF) |
| Effective Pixels: |
2590×1944 / 5034.9K (4:3) |
| Photo definition: |
20M(5120×3840) / 12M(4000×3000) / 8M(3624X2448) / 5M(2590×1944) |
| Shooting No.: |
OFF / 2-5 |
| Video definition: |
1920×1080:60FPS / 1920×1080:30FPS / 1280×720:60FPS / 1280×720:30FPS / 640×480:120FPS |
| Video length: |
1~300s |
| Lens: |
6.0mm HD fixed lens (H FOV:56°, V FOV:42°, F2.0) |
| Trigger time: |
< 0.5 Sec |
| Shooting mode: |
Photo / Video / Photo+Video / Video+Photo |
| Max Shooting: |
OFF, 1~255 |
| Microphone: |
48dB high sensitivity sound collection |
| Buzzer: |
2700HZ, 85dB |
| Trigger Alarm |
| PIR Sensing Angle: |
Horizontal: 50°, 2+5 area Fresnel Lens, each lens covers 10° |
| PIR Sensing Distance: |
20M / 65.62ft (at 77°F / 25°C) |
| PIR Mode: |
Main PIR / OFF |
| PIR Sensitivity: |
Normal / windy Plateau / flat open / dense forest |
| Trigger Interval: |
00:00-59:59 Optional (Default: 01:00) |
| Environmental Data Monitoring |
| Temperature and Humidity: |
Default internal Temperature sensor |
-40~85°C(±0.5°C) / 10~95%(±2%RH), External Temperature and Humidity sensor |
| Pressure: |
Not Supported |
300~1100hPa (±0.06hPa) |
| Altitude: |
Not Supported |
Altitude：9000~-500M, Pressure+GPS |
| Positioning System: |
Mobile phone APP setting（Auto） |
| Ambient Illuminance: |
Not Supported |
| Noise Decibel: |
Not Supported |
| WIFI Communication |
| Connection Band : |
2.4~2.484GHz ISM Band, High gain external antenna. |
| Standards: |
802.11b/g/n, 802.3, 802.3u |
| Transmitting Power: |
-19dBm (Max) |
| Receiver Sensitivity: |
11Mbps-86dBm@8%,54Mbps -73dBm@10%,130Mbps,-66dBm@10% |
| Transmission Speed: |
<150Mbps |
| Wireless Encryption: |
WEP / WPA / WPA2 |
| Transmission Mode: |
WIFI hotspot mode |
| Transmission Distance: |
30M (Open Environment) |
| Wireless Remote Control and External Extended Communication |
| Connection Band: |
433MHZ |
| Wireless Encryption: |
4-digit key, Dynamic encryption |
| Transmission Distance: |
60M (Open Environment) |
| Peripheral Expansion: |
Supports Remote Control, but consumes more power |
| Remote Control Enabled: |
ON / OFF, The key can't Remote Control the camera when it's "OFF" |
| Pairing Key Mode: |
Remote control instructions for details |
| External Trigger Alarm: |
Not Supported |
| Night vision |
| Light Source: |
Highlight White LED, 7000K, Constant Current: 700mA |
| IR Flashlight Distance: |
30M |
| Day/Night Mode: |
Day/night, Auto Switching |
| User Interface Stamp and File Type |
| Stamp: |
ON / OFF; Camera Name, Shooting date, Moon phase, Temperature and humidity, pressure, Battery Power |
| File Type: |
Camera Name, Shooting date, Moon phase, Temperature and humidity, pressure, Battery Power |
| Timer |
| Timer Switch: |
ON / OFF |
| Time Interval Setting: |
Three periods and weekly repetitions can be set daily. |
| Timer Interval: |
0~24 Hour |
| Product Safety |
| Hardware Security Configuration: |
Padlock installation, Anti-theft lock hole |
| System Security: |
Connect the camera with a password. |
| Battery Protection : |
Battery anti-backconnection protection, Warning prompt when installation error occurs. |
| Low Power Protection: |
Battery power is less than 10%, automatic power-off protection. |
| Protection for No Operation: |
Test mode 120 seconds no operation, auto change to Detection Mode.
After Connecting to WIFI, 60 seconds no operation is auto change to Detection Mode. |
| Data Storage |
| Storage Medium: |
TF Card, 4G~64G (Class 10) |
| TF Card Cycle Save: |
ON / OFF |
| TSCAMERA APP |
| System Requirements: |
IOS 7.0 or Android 4.4 above. |
| Real-time Video Preview: |
Only supports AP mode, Direct Video Connection, easy to install and test. |
| APP Function: |
Installation target, parameter setting, time synchronization, shooting test, power warning, TF card warning, PIR test, full screen preview |
| Quick Parameter Setting: |
Supported |
| Online Data Management: |
Video, Photos, Events: Support online Viewing, Deletion, Download |
| Power Supply and Power Consumption |
| Battery Powered: |
4A×AA /8A×AA Battery (1.2V/1.5V/3.7V) |
| Standby Time: |
10~14 Month (8×AA /1.5V) |
| External Power Supply: |
DC 6V / 2.0A |
| Standby Power: |
<80uA (0.00008A / 6V) |
| Power Consumption: |
200 mA (800mA LED ON) |
| Others |
| Connector: |
DC Input, TF Card, USB Port, Power Button, SMA Antenna Port |
| Installation Mode: |
Strap, Tripod nail |
| Operating Temperature Humidity: |
-30°C~+70°C / 30% ~ 90%RH |
| Storage Temperature Humidity: |
-40°C~+85°C / 0% ~ 90%RH |
| Waterproof Grade: |
IP68 (Dust proof / Submerging test) |
| Dimension: |
152 x101 x 66mm |
| Net Weight: |
266g |
| Gross Weight: |
485g |
| Certificate: |
FCC, CE, RoHS |
